Search
Browse Categories
Browse by Manufacturer
Shopping Cart
Your cart is empty.
Products

Luwex Air-Ride Memory Foam 12 pack

<< Previous in Hoof Support and Packing Next in Hoof Support and Packing >>
Air-Ride Memory Foam Luwex
Air-Ride Memory Foam LuwexAir-Ride Memory Foam Luwex Close Up
Price: $204.99
In Stock
Item Number: F:AR-12
Manufacturer: Luwex
The Air-Ride Memory Foam has been referred to as an adjustable resilient expanding memory foam. This is Luwex's most popular product. This liquid turns into a foam when used under a pad.  Simply using drops of water when mixing the product, you can adjust how firm the foam is. The foam retains its shape for the duration a normal 4-6 week shoeing.

It's designed to use under a pad and can be adjusted from firm to soft with a few drops of water.  The kit comes with activator, syringe, and gloves.  Each 60 ml bottle is enough for one hoof. Store Luwex Air-Ride Memory Foam at 60 to 70 degrees before application for best results.

Directions:

Air-Ride™ / Ai-Ride™ is designed to be use with a pad. If you are not using a Luwex pad or one with holes in it, make one to two 14mm holes (3/8'') in your pad on either side of the frog. This will be used for distribution of the product as well as overflow relief. 

• Attach shoe/pad to the foot 

• Using shipping wrap, wrap 2-4 times around the foot to contain any expansion and keep a clean looking job. You can use Duct Tape, however it will stick to the product and when removing may tear some of the material 

• Open the Blue product bottle by unscrewing white top. (Do not cut tip yet) 

• Add drops of water into the BLUE Air-Ride™ / Ai-Ride™ bottle using the supplied small Luwex water bottle or a 3ml/cc syringe for desired density and expansion of the foam. (3-6 drops for the standard sized 60ml/cc and 4-8 drops for the larger 90ml/cc bottles of Air-Ride™ / Ai-Ride™. The more drops the softer the density and increased expansion) 

• Draw up the appropriate amount of activator using a 20ml+ syringe (Standard sized Air-Ride™ 60ml/cc, same size as activator bottle, use 15 ml/cc and large sized Air-Ride™ -/ Ai-Ride™ 90 ml/cc use 20ml/cc ) 

• Inject the activator into the bottle of Air-Ride™ / Ai-Ride™ and replace the white cap.(Secure cap tightly) 

• Shake well for approximately 7-10 seconds.
 

• Cut 1/4” of the tip of the white cap off carefully and Inject Air-Ride™ / Ai-Ride™ into the holes of the pad or the ones you made. Remember the foam will expand so any overfilling will exit out the same holes you are using to inject the Air-Ride™ / Ai-Ride™ product. 

• Any expanded foam can be carefully cut using a sharp hoof knife after set time.
 

• Set-up time s approximately 30 - 90 seconds. If working in cold temperatures (35° and below) Air-Ride™ / Ai-Ride™ activator may become cloudy and crystalized in appearance. Simply warm the Activator and the Air-Ride™ / Ai-Ride™ product slowly (Hair dryer on warm setting) until you can shake it easily and then use. Air-Ride™ has been stored and used in -15° successfully by following the above directions.

Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)
Products
Search
Mailing Lists
Shopping Cart
Your cart is empty.
Browse Categories